Fasarit

Fasarit^® is our special product which is a ready-to-use decorative interior paint. By applying it with a paint gun, decorative textures are obtained on the walls and the ceilings.

Decorative
By using different application methods, various decorative patterns with unlimited texture combinations can be obtained. Its decorative texture masks the roughness of the wall and ceiling surfaces. It can be used in different places like offices, residences, etc. and it minimizes the imperfections caused by improper practices of plastering applications.

Durable
Since our product is produced by using high quality additives, it doesn't crack, peel, blister nor moulder. It is resistant to water, humidity and impacts. Since it is produced by using acrylic binder of Swiss Clariant, it completely adheres and corresponds with the surface.

Economical
It minimizes coating roughness and is a budget friendly solution for renovation of old surfaces. It is very easily applied by using its special auxiliary equipments. Gunning application helps you saving time and labour. A squad of three people can apply it to a surface of 200-400 m² per day. After the application, the surface can be painted several times and its texture retains.

Sanitory
It is water-based. It doesn't contain any substances that are harmful for human health and environment. It keeps molds, bacterias and microbes away.

• Plaster, Stucco
• Gas Concrete
• Plastered Surfaces
• Paste Backfilled Surfaces
• Prefabricated Buildings
• Wood, Wallboard, Gypsum Boards

Before applying Fasarit^® to the walls and ceilings, the surfaces that Fasarit^® would not be applied must be masked. The compressor must be set to 300 liters per minute for air quantity and 4-6 atü (kPa/cm²) for air pressure. After finishing the application, the materials must be cleaned by water before paint dries. The surface and air temperature should not be less than +5^oC during the application.

To avoid the water loss of Fasarit^® and get better adherence to the wall, 1 kg Izole Lak Pure Acrylic Primer should be mixed with 5 lt of water and must be applied to the wall by using brush or paint roller until the surface is saturated. Plastic Putty must be applied for slight imperfections and Rustik Putty must be applied for subtler imperfections.

1 tin can of Fasarit^® must be reduced by using approximately 1-2 lt of water. Mixing must be applied by using vessel set. Fasarit compressor set, vessel set and paint gun is used for spraying the desired size of grain. After applying Fasarit^®, Plastic Paint is used for the walls; Ceiling Plastic Paint is used for the ceilings.

Consumption
Izole Lak Pure Acrylic Primer: 0.020-0.030 kg/m²
Fasarit^®: 0.700-0.900 kg/m²
Plastic Paints: 0.300-0.400 kg/m²

The material must be stored in cool environments and must be prevented against frost. The product must be used within 12 months.

Fasarit^® is packaged and introduced to the market as 30 kg tin cans and 20 kg poliethylene buckets.