Glade

Glade^® is an acrylic copolimer emulsion based, ready-to-use paint containing different minerals. It helps the applied surface to breathe and is decorative since it gives the surface a marble texture and look.

Decorative
Gives marble appearance to the applied surface. It is decorative since it offers wide range of colors and gives the surface a marble and nacrous look. By using different techniques, numerous decoration combinations can be obtained.

Durable
High quality additives is used in the production thus it makes the applied surface resistant to extreme environmental conditions and thermal shocks. Since it has a high proportion polymer additives in its composition, it completely adheres and corresponds with the surface. It is a flexible, water-repellent product which is resistant to the thermal shocks.

Sanitory
It is water-based. It doesn't contain any substances that are harmful for human health and environment. It has a high value of vapour permeability and lets the applied surfaces breathe. It keeps molds, bacterias and microbes away.

• Plastered Surfaces
• Wood, Wallboard, Gypsum Boards
• Prefabricated Buildings

To avoid the water loss of Glade^® and get better adherence to the wall, 1 kg Izole Lak Pure Acrylic Primer should be mixed with 5 lt of water and must be applied to the wall by using brush or paint roller until the surface is saturated. Plastic Putty must be applied for slight imperfections and Rustik Putty must be applied for subtler imperfections.

Glade is applied as three coats. First coat of Glade^® is applied all over the surface by using scraper or trowel. After drying completely, second coat is applied. Second layer is applied by circular motion through the sides moving from outside towards inside. After the surface dries, the third layer should be applied with a spatula in a patch pattern. Immediately following the application, and before the product is dry, the polishing process must be started with the help of a trowel. Application must be made with care without applying too much pressure on the surface. If too much pressure is applied on the surface, it will appear as a scratched surface.

For the application of Glade^®, the surface must be stable and solid. So if it is applied in a new construction, four weeks are needed for the hardening of the cement. The temperature must be between 5^oC and 35^oC degrees. The surface becomes dry in 3 hours under the temperature of 20^oC and 65% humidity conditons. It takes 24 hours to be dry completely and resistant to impacts.

Consumption
Izole Lak Pure Acrylic Primer: 0.020-0.030 kg/m²
Glade^®: 0.600-0.800 kg/m²

The material must be stored in cool environments and must be prevented against frost. The product must be used within 12 months.

Glade^® is packaged and introduced to the market as 1, 4 and 20 kg poliethylene buckets.